Heads or tails, everyone wins in this coin toss.
-
Complete your stamping on both blanks.
-
Use your Chasing Hammer to lightly tap around the rim of the blanks to soften out the edges and to add texture.
-
Punch both rivet holes in the first stamped blank.
-
Hold that blank back-to-back with the second stamped blank. Use a pen to mark through one hole on the first blank, placing a mark on the second blank to punch the first rivet hole. Do not punch the second rivet hole on the second blank yet.
-
Rivet the two pieces together through that first side. Before hitting the rivet for the final few times, make sure the circles are lined up perfectly before setting that rivet.
-
Use your hole punch pliers (or drill) to punch through that second hole on the first blank and punch a corresponding hole in the second blank.
-
Add your second rivet.
This item does not have any reviews yet.