It's a good idea to make sure you have room for your letters, numbers and/or any designs you may be adding to the blank. Even experienced stampers will plan out a design before stamping it out. We have a perfect solution that is both low in cost and very helpful in planning for space, etc. Try our Aluminum Foil Practice Stamp Sheets.

Scroll down the page a bit and you'll find Related Online Classes with Similar Techniques below. These are classes we've specifically chosen to help you make this project. If you're new to metal stamping, here is our Beginners Metal Stamping Checklist.

Stamp, darken and polish.

Add your Flat Back Crystals. 

Decide on where you're going to punch a hole and mark it with a sharpie on the blank. We've punched our hole right above the triangle banner so the ornament will hang nicely on the tree. 

Make a hole using Power Punch Pliers or a Screw Down Hole Punch. We've included product videos on how to use these tools in this link.

Use a jump ring and ribbon, an ornament hook or scroll down to learn How to Make an Ornament Hook.