




Join instructor Aisha Formanski as she fires up the torch and walks you step-by-step through creating your very own bangles. Aisha covers soldering with large gauge round wire and flat rectangle wire. She'll also show you how to perfectly size your bangles and ways to embellish them with stamping and texturing. Bangles are so versatile -- have fun with this project!
This class has a run time of 26 minutes.
-
Cutters that are appropriate for cutting 10 gauge wire.
-
Filtered butane fuel
-
Soft measuring tape
-
Ruler
-
Non-combustible work surface
Excellent as always. I don't think there is a bad class in any of the Beaducation line-up.
Please add a step on how you work harden them.
Thanks for your feedback! You make a great point. We found that shaping the bangle on the steel bracelet mandrel with a non-marring mallet, or shaping by hand with the Nylon Bracelet Pliers, work-hardens the bangle enough to keep its shape because we used a thick gauged material in this lesson. If a piece needed to be further work hardened, these same steps could be repeated.
I would have like to see the patina and buffed back part also. Will check to see if Aisha has more videos.
thanks again.