3/32" EZ-Rivet Eyelet Flaring Kit
![Jewelry Making Tools 3/32" EZ-Rivet Eyelet Flaring Kit](https://d2pafxp37ue0ak.cloudfront.net/system/zen_products/images/4355/larger/TL055.jpg?Jewelry Making Tools 3/32" EZ-Rivet Eyelet Flaring Kit)
This is a separately sold kit to use with the EZ-Rivet Piercing & Setting Tool.
Includes:
- T-Bar Screw for piercing and flaring
- Flat and Domed Bases for piercing and flaring
This is used with our Brass Hollow 3/32" Eyelets, 5/32" Long and Brass Hollow 3/32" Eyelets, 3/32" Long.
When using this punch with the Riveting System, unscrew the punch all the way before removing the metal or you will pull on the punch and weaken the tool. Make sure the little circle of metal removed by the punch has popped out of the tool and isn't clogging up the hole. If it doesn't drop out, screw the tool down to push that little piece of scrap through. You can then give the tool a little shake to ensure that the metal falls right out.
Frequently Purchased Together
