Metal Stamping Tools Large Diamond Metal Design Stamp, 9mm - Beaducation Original
Metal Stamping Tools Large Diamond Metal Design Stamp, 9mm - Beaducation Original
Metal Stamping Tools Large Diamond Metal Design Stamp, 9mm - Beaducation Original
Model: DS593
Greyheart
Grey_stars
Stars
(11 Reviews)
$17.00
Qty:
  • 9mm wide by 9mm high.
  • Made from 1/2" square heat-treated tool steel.
  • Beaducation Original Design.
  • Made in the USA.
  • Arrive coated in oil to prevent rusting. 
  • Wipe oil away with paper towel. Do not use water.
  • If you like this Large Diamond you might love our Small Diamond
- BIG NEWS, This Stamp Is Rated for Stainless -
  • Rated to use on all soft metals and stainless steel (if you are a newbie, "rated" means it's specifically rated yes/good/go for it).
  • Knives are hardened steel and none of our stamps should be used on knife blades.
  • Just because a stamp "can" stamp in stainless, doesn't mean it will be easy. We do not recommend this metal for beginners. Stainless steel is very difficult to stamp on because it is such a hard metal. The larger and/or more intricate the design, the harder it will be to impress into stainless. Tape your blank to your bench block and consider using a 2 lb hammer.
  • We highly recommend buying a few stainless steel blanks to use as practice pieces.

WAIT, WHAT? Haven't you always said to not use these stamps on stainless?

The short answer - Yes, you are correct. Our rule has been to keep our stamps off of all stainless but we have now realized that is too general. Not all stainless is created equal and with the now widely available jewelry-grade stainless blanks (most often grade 304, 316 or 430), we have discovered that our stamps hold up great on non-hardened stainless (all the stainless blanks we sell).

The long answer - The rule to keep our stamps off stainless came from years ago when we really couldn't tell what kind of stainless people were stamping on but often it was non-jewelry items that were too hard and could damage the stamps. Now that we carry blanks made mostly for jewelry intention (and some pet tags) we decided to reevaluate and take a closer look and challenge our rule. After extensive research and testing of both our tools and stainless blanks (both in-house and sending them out to machine shops to be tested), the results are in....and we can say with total confidence that our stamps will hold up on non-hardened stainless. I (Lisa) have personally tested many of our Beaducation Original design stamps and letter sets and I've had a handful of customers test them as well (testing with 100+ impressions). We have found that they can impress into stainless steel quite well AND they hold up. For example, I stamped one of our script letters 700 times into a few of our stainless blanks (and on a spoon!). The stamp and its impression still look great. That being said, if you are wondering how long they will last if mainly being used in stainless, we really have no way of accurately answering that. There are so many factors involved (what exactly you are stamping, the amount of detail in the design, overall stamp size, what size hammer you use, etc.) but based on our testing, it will last a long time. :)

The Advantage Series and Stamp Yours stamps will last even longer. They are very sharp faced and made to endure high volume stamping in stainless (but again, don't stamp on hardened knife blades).

Made_in_usa

Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.

For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.

Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.

 

Grey_stars
Stars
SO EXCITED to start using this stamp. It is amazing!!! So versatile! Great Quality!
05/23/2017
Trish
Grey_stars
Stars
Love they made this in a bigger stamp. Leaves good impression. Overall great quality!
05/26/2017
Ashley
Grey_stars
Stars
Great size and high quality! Easy to stamp even though it is a larger size.
11/14/2017
Katy
Grey_stars
Stars
Nice big bold stamp! Makes a nice clean impression.
11/14/2017
Belinda
Grey_stars
Stars
The only problem with this...is now I want the smaller one too! It is great for edging with the tilt and tap method!
11/15/2017
Marcia
Grey_stars
Stars
So after a long debate with myself, I broke down and got the Large and Small diamond stamp. And all I have to say is "What the heck was I waiting for?" I LOVE this stamp. I want to use it on everything. It is a show stopper. I do use tap n tilt with it and get a great impression. I will be using this one a lot. Thank you Lisa and the whole team at Beaducation for coming up with this one.
11/20/2017
Angel H
Grey_stars
Stars
I love this large diamond! It stamps beautifully with the tilt and tap method. I used to use my 2lb hammer till I tried tilting and tapping. I like the impression so much better.
03/09/2018
Haley
Grey_stars
Stars
Exactly what I was looking for to make a necklace for my daughter! Big size, great impression, awesome stamp!
03/13/2018
Karla
Grey_stars
Stars
I got this to use on a congrats on your engagement gift. She loved it!
Worked best with a slow tilt and tap instead of a hard whack.
06/30/2018
Pat
Grey_stars
Stars
Smooth, clean impressions. Tilt and Tap really makes this easy to use. LOVE it!
07/17/2018
Cindy
Grey_stars
Stars
Love this stamp, now I need to order the smaller one.
05/14/2019
Dianne
Frequently Purchased Together
DS592
Grey_stars
Stars
Greyheart
Metal Stamping Tools Faceted Crystal Metal Design Stamp, 10mm - Beaducation Original
$17.00
Qty:
DS594
Grey_stars
Stars
Greyheart
Metal Stamping Tools Small Diamond Metal Design Stamp, 5mm - Beaducation Original
$15.00
Qty:
HOL020
Grey_stars
Stars
Greyheart
Metal Stamping Tools Design Stamp Holder, 12mm Holes, 50 Holes
$5.75
Qty: