Pointy Leaf Set Metal Design Stamps, 5mm and 4mm - Beaducation Original
- Designs measure: 5mm x 2.5mm. and 4mm x 1.5mm
- Made from two 1/4" square heat-treated tool steel shanks.
- Beaducation Original Design.
- Made in the USA.
- Arrives coated in oil to prevent rusting.
- Wipe oil away with paper towel. Do not use water.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.
For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
These sweet leaves give the perfect detailed stamps to your floral creation.
I really like the undulating shapes of these leaves. They lend a natural look to my stems and twigs.
These leaves do not disappoint. I had hesitated to buy them, because I was not sure about the size. I cannot visualize size at all. They are perfect. They are great leaves for stems and floral designs AND I also look forward to using them to create fall designs. These stamp very well!