Long Stem with Three Leaves Metal Design Stamp, 17mm - Beaducation Original
- Design measures: 17mm x 5mm
- Made from 1/4" x 3/4" rectangular heat-treated tool steel.
- Beaducation Original Design
- Made in the USA.
- Arrives coated in oil to prevent rusting.
- Wipe oil away with paper towel. Do not use water.
- Can be stamped in either direction.
- This stem pairs perfectly with any of our flower faces!
- Check out other stems with leaves.
Design Stamps are a bit tricky. I highly recommend you practice on some cheap metal before diving into your Sterling Silver or Gold Filled. Click here to purchase a piece of sheet to practice on.
For best results with Design Stamps, make sure there is NO padding under your Bench Block with the exception of a Sandbag, make sure you are working on a stable table, and use a hammer which weighs at least 16 ounces. We recommed a Brass Head Mallet. Feel free to hit the stamp more than once, but hold the stamp steady, making sure you don't shift at all between hits. The more confident you are with the hammer and the strength behind it, the better your impression will be.
Click the TILT & TAP STAMPING METHOD button above for more tips on working with our Design Stamps.
BIG CLOSEOUT SALE 300+items at 50% off.
Love this new stamp! So versatile and easy to use!
LOVE this stamp. Since it is longer, I have found a heavier hammer is better and using the tilt and tape method is a must. I see myself using this stamp on its own as well as in floral designs. I think it is a wonderful and versatile stamp.
A really lovely stamp with endless possibilities. Easy to use with beautiful clear impression.
absolutely love this stamp!!! super easy to use and the shank is a great thin design making it super easy to align the stamp just where you want it.
Beaducation has done it again. We asked for more foliage type stamps. This one in particular is really versatile, you can use it as one stamp, or I have have really good luck using it on edges or only the top portion so you only see the leaves. I use a 2 lbs brass hammer and have had no issues with partial stamp impressions. Used on annealed copper, pewter and of course aluminum.
This is a great stamp! You can never have enough leaf / stem designs!!
Makes a great filler in a bouquet w/o a lot of stamping. Makes a good impression!
I love this stamp! It's a great addition with the echinacea and tulip stamps!
A graceful stamp that is easy to use and adds so much to my creations.