We are moving and are closed until Monday 4/22. You can place an order during this time but shipping will not resume until 4/22.

Stainless Steel Shot (304) for Tumbling, No Pins, 2 Pound Bag

1 Review
Product Description
Sku: POL046

$39.00
Maximum quantity available reached.

304 Stainless Steel Shot for Tumbling, No Pins, 2 Pound Bag

Sold by the 2 pound bag, this highly polished stainless steel shot mix is a combination of three shapes: diagonal, round and ballcone (no pins). Each does a different job in burnishing metals to a bright finish in the minimum amount of time.

Tumbler and Burnishing Compound sold separately, OR purchase all items as a kit.

BEFORE TUMBLING YOUR JEWELRY

  • When first receive your shot, you will need to clean it. Tumble your shot with distilled water (about 1" above the shot) and about a tsp of Shine Brite for 15 minutes. Drain, rinse and repeat. This will remove any oils or dirt left on the shot from the manufacturing process. If the water doesn't drain clean after the 2nd run, repeat again.

TUMBLING YOUR JEWELRY OR METAL

Place your shot and jewelry in the barrel, then cover with water (about an inch above the contents) and add 2-10 drops of Shine Brite. Place barrel on tumbler and tumble away! Check your water every 20 minutes or so. If it is dirty, rinse and refill with fresh water and fresh Shine Brite.

  • Because everyone's water is different, we recommend only tumbling with distilled water.
  • Always rinse tumbler barrel and shot after every use and allow to air dry.
  • Do not store shot in the tumbler barrel. This is to ensure that the shot and barrel stay dry between uses.

This is a 3lb capacity tumbler. The combined weight of the water, your jewelry and the shot needs to be below 3lbs. If your barrel is not turning you likely have too much shot in there. You want your tumbler to be able to spin!

I tend to tumble for 30 or so minutes. To harden Jump Rings, tumble for at least an hour.

Frequently Purchased Together