This item does not qualify for Free Shipping promotions. This item will not be shipped outside of the USA/CAN.
We have a very low markup on this to make it more affordable for everyone, so it will likely never go on sale.
Designed for years of trouble free service, this 3 pound capacity tumbler is perfect for cleaning and burnishing your sterling silver, silver filled, copper, brass, gold and gold filled jewelry and jump rings. The barrel is made from a hard rubber to minimize noise.
A liquid burnishing compound made especially for use in the rotary tumbler with stainless steel shot. It is an odorless, biodegradable concentrate that leaves tumbled pieces bright and clean.
2 POUND BAG OF SHOT
Highly polished stainless steel shot, is a combination of three shapes; diagonal, round and ballcones. Each does a different job in burnishing metals to a mirror bright finish in the minimum amount of time.Stainless steel requires only occasional cleaning and gives great uniformity. Since it's 304 stainless steel, it is rust and corrosion resistant and able to stand up to strong compounds.
BEFORE TUMBLING YOUR JEWELRY
Please read the manufacturer's pamphlet (included with tumbler) for proper care and maintenance of your tumbler.
TUMBLING YOUR JEWELRY OR METAL
Place your shot and jewelry in the barrel, then cover with water (about an inch above the contents) and add 2-10 drops of Shine Brite. Place barrel on tumbler and tumble away! Check your water every 20 minutes or so. If it is dirty, rinse and refill with fresh water and fresh Shine Brite.
This is a 3lb capacity tumbler. The combined weight of the water, your jewelry and the shot needs to be below 3lbs. If your barrel is not turning you likely have too much shot in there. You want your tumbler to be able to spin!
I tend to tumble for 30 or so minutes. To harden jump rings, tumble for at least an hour.