Magnolia Flower Stamped Earring DIY
A geometric and minimalistic blend creating a pair of pretty magnolia earrings. Add a textured edge and a crystal bead as shown to add a little sparkle.
-
It's a good idea to make sure you have room for your design stamps to fit nicely. Even experienced stampers will plan out a design before stamping it out. We have a perfect solution that is both low in cost and very helpful in planning for space, etc. Try our Aluminum Foil Practice Stamp Sheets.
-
Scroll down the page a bit and you'll find Related Online Classes with Similar Techniques below. These are classes we've specifically chosen to help you make this project. If you're new to metal stamping, here is our Beginning Metal Stamping Checklist.
-
Texture the edge of the blank with a chasing hammer.
-
Darken and polish.
-
Measure and cut chain.
-
Punch holes and to your chain with jump rings.
-
Use a jump ring to connect the chain to the ear wires.
Note: We made our own wire wrapped loop to hold our crystal bead. Learn this technique in our Wire Jewelry Fundamentals Class.
Helpful charts and guides
Tools & Materials
Magnolia Open Flower 1, Metal Design Stamp, 10mm - Beaducation Original
