Current turnaround time is 2-5 business days.
  1. Home
  2. Soldering & Fusing Tools
  3. Stainless Steel (304) Shot for Tumbling, Balls Only, 2 Pound Bag

Stainless Steel (304) Shot for Tumbling, Balls Only, 2 Pound Bag

Previous Product | Next Product
Write a review
Product Description
Sku: POL047

$39.00
Maximum quantity available reached.

304 Stainless Steel Shot for Tumbling, Balls Only, 2 Pound Bag

Sold by the 2 pound bag, this highly polished stainless steel shot with only ball shaped media, is perfect for those not wanting (or needing) the media shapes with angles and edges on them.


Tumbler and Burnishing Compound sold separately

BEFORE TUMBLING YOUR JEWELRY

  • When first receive your shot, you will need to clean it. Tumble your shot with distilled water (about 1" above the shot) and about a tsp of Shine Brite for 15 minutes. Drain, rinse and repeat. This will remove any oils or dirt left on the shot from the manufacturing process. If the water doesn't drain clean after the 2nd run, repeat again.

TUMBLING YOUR JEWELRY OR METAL

Place your shot and jewelry in the barrel, then cover with water (about an inch above the contents) and add 2-10 drops of Shine Brite. Place barrel on tumbler and tumble away! Check your water every 20 minutes or so. If it is dirty, rinse and refill with fresh water and fresh Shine Brite.

  • Because everyone's water is different, we recommend only tumbling with distilled water.
  • Always rinse tumbler barrel and shot after every use and allow to air dry.
  • Do not store shot in the tumbler barrel. This is to ensure that the shot and barrel stay dry between uses.

This is a 3lb capacity tumbler. The combined weight of the water, your jewelry and the shot needs to be below 3lbs. If your barrel is not turning you likely have too much shot in there. You want your tumbler to be able to spin!

I tend to tumble for 30 or so minutes. To harden Jump Rings, tumble for at least an hour.

Frequently Purchased Together  

×
by